General: Series #100 French Patio Doors shall be manufactured by DorAlum, Miami FL. and shall meet or exceed the South Florida Building Code and ASCE 7-88 on certain elevations.

Materials: All frame and door members consist of .078" wall thickness extruded aluminum alloy 6063-T6. Threshold shall be the bumper type with bulb vinyl weather stripping, 4"x 1/2" and 13⁄8" at sill.

Construction: Frames shall be coped with four screw splines and one door stop fin used at head and jamb. Corners are butt joined. Door stiles consist of 13/4" x 41⁄8" face with a .078" wall thickness extruded aluminum and a built in door stop. Top and bottom rails are secured to stiles with 3⁄8"-16x full length steel rod using 4" long jamb stiffener, a 3⁄8" nut and washer at each end. An additional open back adapter, 15⁄8" x 43⁄16", is used at intermediate fixed vertical mullions.

Weather stripping: Double row of pile with integral plastic fin at each panel bottom rail. Single row of bulb vinyl at each lock stile of double panel door. Double row of bulb vinyl at frame sill.

Hardware: A non-corrosive flush bolt is standard for inactive leafs. Active leaf pre-bored for double lockset 21⁄8" for a 23⁄8" backset (Gov.161). Three heavy-duty, 1⁄8" thick extruded aluminum butt hinges, 77⁄8" long with 5⁄16" plated steel rod. Anti lift-out pins.

Glazing: Door panels pocket glazed using a flexible glazing spline.

Finish: All aluminum members will receive an ESP finish. Standard color is white.